Haier Flat Panel Television HLA15 User Manual

HLA15/HLA19  
LCD TV  
USER MANUAL  
Please read this manual carefully  
before using this TV set and keep it  
for future reference.  
 
To users:  
Thank you for purchasing our LCD-TV.  
Before connecting the LCD-TV and turning on the power, please  
read this book carefully. Please keep this book for later use.  
If the unit is disabled by an electrostatic discharge, please turn off  
the power to the unit and turn it back on to reset.  
CONTENT  
Safety Notice Items...................................................................................  
Front Panel Controls..................................................................................  
Connection Options...................................................................................  
Remote Control Key Functions...................................................................  
1
2
3
4
5
Remote Control  
..................................................................................  
Installing Batteries..................................................................................  
5
Connection Instructions.............................................................................  
Grounding..............................................................................................  
External equipment Connections..............................................................  
Antenna Connection.............................................................................  
PC Setup.............................................................................................  
VCR Setup...........................................................................................  
Cable TV Setup....................................................................................  
6
6
6
6
7
8
9
External AV Source Setup......................................................................  
9
Basic Operating Instructions.......................................................................  
10  
Turn on the LCD-TV.................................................................................  
10  
Audio Control..........................................................................................  
Mute......................................................................................................  
10  
10  
Select the TV Channel You Want...............................................................  
11  
Picture Mode...........................................................................................  
11  
Program Scan.........................................................................................  
11  
Sleep......................................................................................................  
11  
Menu Operations.......................................................................................  
Picture Menu Options...............................................................................  
Picture Menu Options Continued...............................................................  
Sound Menu Options................................................................................  
Sound Menu Options Continued................................................................  
12  
12  
13  
13  
14  
Function Menu Options.............................................................................  
15  
Function Menu Options Continued.............................................................  
16  
Adjust Menu Options................................................................................  
Tuning Menu Options..............................................................................  
Tuning Menu Options Continued..............................................................  
Parental Menu Options.............................................................................  
Parental Menu Options Continued.............................................................  
16  
17  
18  
18  
19-21  
22  
23  
Troubleshooting Guide...............................................................................  
Specifications...........................................................................................  
 
Safety Notice Items  
Incorrect usage may cause fire or electric shock. To prevent this, please do as  
required when you are installing, using and cleaning this machine. To ensure  
your safety and extend the life-span of LCD-TV, please read the following items  
carefully before using:  
l Please read and understand all the instructions before operation;  
l Please keep this manual for later use;  
l Please comply strictly with the warning instructions on the machine and  
in this book;  
l Please comply with the instructions provided;  
l Please do not use additional devices that are not recommended by  
manufacturer:  
l Before operation, please make sure that the operating voltage of your unit is  
correct;  
l Do not place the unit on unstable, dusty and humid places;  
l Never put the unit in direct sunlight or near heat sources;  
l Allow enough space for proper ventilation;  
l Please keep water away from the LCD-TV . If water comes in contact with the  
LCD-TV, disconnect the power cord from the power source, then wipe the set  
with a dry soft cloth;  
l Do not remove the back cover. If service is needed, please contact an  
Authorized service technician.  
 
Front Panel Controls  
2
3
4
5
1
TV/AV MENU VOL- VOL+ CH-  
CH+ POWER  
HLA19  
HLA15  
6
7
7
6
Control Panel Function  
1. Power supply switch  
2. TV/AV  
Selects the input signals: TV/AV/S-VIDEO/PC/  
COMPONENT  
3. MENU Press to select the main menu  
4. VOL- Volume down / Left orientation to adjust the item in the OSD  
VOL+ Volume up / Right orientation to adjust the item/Press to enter  
5. CH- TV channel down / to select the item in the menu  
CH+ TV channel up / to select the item in the menu  
6. Power indicator  
Illuminates red in standby mode, illuminates green when the display is  
turned on  
7. Remote Sensor  
Receives the signals from the remote control  
 
Connection Options  
The above figure is for reference only,  
connections may differ depending upon  
the models  
Antenna Input  
Connect cable or  
antenna signals to  
the TV, either direc-  
tly or through your  
cable box.  
Earphone port  
PC Audio Input  
AV/S-VIDEO/  
COMPONENT Audio  
Input  
Connect the audio  
output from the pc  
to the audio input port  
Connect audio output  
from an external device  
to these jacks  
Video Input  
Connect video output  
from an external  
device to this jack  
S-Video Input  
Connect S-Video out  
from an S-Video device  
to the jacks.  
DVD/DTV Input  
Connect a component  
video/audiodevice to  
these jacks  
VGA Input  
Connect to the VGA  
15PIN analog output  
connector of a PC  
display card to use set  
as a PC display  
 
Remote Control Key Functions  
When using the remote control, aim it towards the remote sensor on the TV  
MUTE  
1
2
4
RECALL DISPLAY  
EXIT  
3
5
1
4
2
5
8
0
3
6
6
8
7
MTS/SAP  
9
P.STD  
7
9
MENU  
TV/AV  
10  
11  
CH+  
CH-  
VOL  
-
VOL  
+
12  
13  
15  
14  
CCD  
SLEEP  
SCAN  
Illustration of the keys on the remote control:  
Press to mute the sound  
1. MUTE  
2.  
Press to turn the TV on and off  
While in TV mode, press to return to the previous channel  
Press to turn off the on screen display  
3. RECALL  
4. EXIT  
Display current input signal information  
5. DISPLAY  
TV channel number select  
6. 0-9  
Select MONO,STEREO, SAP in NTSC system  
7. MTS/SAP  
Select picture mode: PERSONAL/STANDARD/MILD/FRESH  
To display/exit the main menu  
8. P.STD  
9. MENU  
Select TV/AV/S-VIDEO/PC/ COMPONENT  
10. TV/AV  
TV channel up/down or select the item of the menu  
11. CH+/CH-  
12. VOL+  
Volume up / to select the main menu/ to adjust the item/ to  
enter the submenu.  
Volume down / to select the main menu/ to adjust the item  
VOL-  
Closed caption on/off  
13. CCD  
14. SCAN  
Press to scan through memorized TV channels  
Press to set the sleep timer  
15. SLEEP  
 
Remote Control  
Installing Batteries  
!
Remove the battery cover.  
!
Insert two size AAbatteries matching  
the +/-polarities of the battery to the +/-  
marks inside the battery compartment.  
Precautions  
As strong light may interfere with the  
signals, change yourposition to  
operate the remote control if  
the television cannot be turned  
on or off as expected.  
Make sure that there is no  
obstacle between theremote  
controller and televisionset.  
Make sure that two AA 1.5V alkaline  
batteries are loaded. The batteries  
must be of the same type, must be  
inserted properly, and must not be  
rechargeable.  
Keep the remote control  
away from heat sources or  
humid areas toensure  
effective performance of  
the remote.  
 
Connection Instructions  
Grounding  
Ensure that you connect the grounding / earth wire to prevent possible  
electric shock. If grounding methods are not possible, have a qualified  
electrician install a separate circuit breaker. Do not try to ground the  
unit by connectingit to telephone wires, lighteningrods, or gaspipes.  
External Equipment Connections  
Antenna Connection  
- Antenna or Cable Service with a Cable Box Connections  
- For optimum picture quality, adjust antenna direction if needed.  
Multi-family Dwellings/Apartments  
(Connect to wall antenna socket)  
wall antenna  
socket  
Bronze Wire  
RF coaxial wire (75 ohm)  
VHF antenna  
UHF antenna  
Turn clockwise to tighten.  
Bronze Wire  
Be careful not to bend the bronze  
wire when connecting the antenna.  
outdoor  
antenna  
Single-family Dwellings /Houses  
(Connect to wall jack for outdoor antenna)  
To improve picture quality in a poor  
signal area, purchase and install a  
signal amplifier.  
If the antenna needs to be split for two  
TVs, install a 2-Way Signal Splitter  
in the connections.  
If the antenna is not installed properly,  
contact your dealer for assistance.  
NOTE: Cables shown are not included with the TV  
 
Connection Instructions  
PC Setup  
You can use your LCD-TV as a monitor for your personal computer using a VGA  
cable (not supplied).  
Connection and use steps:  
1.Read the userguide supplied with  
your computer and ensure that it has  
a VGAconnector;  
2.Make sure that the power of the LCD  
-TV and thePC are off;  
3.Connect a Dtype 15-pin VGAinterface  
cable ( not supplied ) to the VGAvideo  
interface connector on the PC. Then  
connect the other end to the VGA video  
interface connector on the back of the  
LCD-TV.Tighten the screwson the VGA  
connectors once they are firmly  
connected;  
4.Turn on the power ofthe LCD-TV first,  
and then turn on the power of the PC;  
5.Press the INPUT button to set the video  
input mode ofthe LCD-TV toPC-RGB;  
6.Check the image on your TV. There may be noise associated with the resolution,  
vertical pattern, contrast or brightness in PC mode. If noise is present, change  
the PC mode to another resolution, change the refresh rate to another rate or  
adjust the brightness and contrast on the menu until the picture is clear. If the  
refresh rate of the PC graphic card can not be changed,change the PC graphic  
card or consult the manufacturer of the PC graphic card.  
 
Connection Instructions  
VCR Setup  
- To avoid picture noise (interference), leave an adequate distance between the  
VCR and TV  
Connection and use steps:  
1.Read the user guide supplied with your AV devices and ensure that it has  
Composite or S-Video connectors;  
2.Make sure that the power of the LCD-TV and the AV device are off;  
Connection Option 1  
Set VCR output switch to 3 or 4 and then  
tune TV to the same channel number.  
Connection Option 2  
1. Connect the audio and video cables from  
the VCR's output jacks to the TV input jacks,  
as shown in the figure.  
When connecting the TV to VCR, match  
the jack colors (Video = yellow,Audio  
Left = white,and Audio Right = red).  
If you connect an S-VIDEO output from  
VCR to the S-VIDEO input, the picture  
quality is improved; compared to conne-  
.
cting a regular VCR to the Video input.  
2. Insert a video tape into the VCR and press  
PLAY on the VCR. (Refer to the VCR owner  
manual.)  
s
3.Turn on the power of the LCD-TV first ;  
and then turn on the power of the AV  
device;  
4.Press the TV/AV button to set the video  
input mode of the LCD-TV to S-VIDEO  
mode or AV mode.  
1
2
VCR  
 
Connection Instructions  
Cable TV Setup  
- After subscribing to a cable TV service from a local provider you can watch cable  
TV programming. The TV cannot display TV programming unless a TV tuner  
device or cableTV converter box is connectedto the TV.  
- For furtherinformation regarding cableTV service, contact your localcable TV  
service provider(s).  
Connection Option 1  
1. Select 3 or 4 with channel switch on cable  
box.  
2. Tune the TV channel to the same selected  
output channel oncable box.  
3. Select channelsat the cablebox or with  
the cable box remote control.  
Connection Option 2  
1. Connect the audio and video cables from  
the Cable Box'soutput jacks tothe TV  
input jacks, as shown in the figure. When  
connecting the TV to a Cable Box, match  
the jack colors  
(Video = yellow, Audio Left = white, and  
Audio Right = red).  
2. Select theinput source byusing the TV/AV  
button on the remote control.  
3. Select your desired channel with the  
remote control forcable box.  
External AV Source Setup  
How to connect  
Connect the audio and video cables from  
the external equipment's output jacks to the  
TV input jacks, as shown in the figure.  
When connecting the TV to external equip-  
ment, match the jack colors (Video = yellow,  
Audio Left =white, andAudio Right =red).  
How to use  
1. Select theinput source byusing the TV/AV  
button on the remote control.  
2. Operate the corresponding external equi-  
pment. Refer to external equipment ope-  
rating guide.  
 
Basic Operating Instructions  
Turn on the LCD-TV  
When the POWER  
button is pressed and the LCD-TV  
is turned on, the indicator light on the front of the LCD-TV  
changes from red to green. When the LCD-TV is turned off  
using the power button, the LCD-TV will go into standby  
mode and the indicator light turns red.  
TV  
AV  
S-VIDEO  
PC  
COMPONENT  
Each time you press the TV/AV button, TV, AV, S-VIDEO, PC,  
COMPONENT will appear on the screen in order.  
Audio Control  
1.Press the VOL+ button to increase the volume. A number will appear  
on screen indicating the volume level.  
2.Press the VOL- button to decrease the volume. A number will appear  
on screen indicating the volume level.  
Mute  
1.Press the MUTE button to mute the sound temporarily. A mute icon  
appears on the screen.  
2.Press the MUTE button or VOL+/VOL- again to restore the sound.  
The mute icon disappears.  
 
Basic Operating Instructions  
Select the TV Channel You Want  
You can use the number keys on the remote control to directly select TV  
channels.  
The LCD-TV can store up to 181 channels , and you can press the keys on the  
remote control or on the panel to make a selection.  
Picture Mode  
Press P.STD button on the remote control for menu display . For desired mode as  
follows:  
PERSONAL STANDARD MILD FRESH  
Program Scan  
Press SCAN button to scan through all the memorized TV channels. The scan  
will pause for about 2 seconds on each channel .  
If you want to stop the function during auto scanning, simply press the SCAN  
button again .  
Sleep  
Press SLEEP button to setthe time :SLEEP 240 MIN-SLEEP 180 MIN-  
SLEEP 120 MIN -SLEEP 90 MIN-SLEEP 60 MIN-SLEEP 45 MIN-SLEEP 30 MIN-  
SLEEP 15 MIN-SLEEP 10 MIN-SLEEP 5 MIN-SLEEP 0 MIN  
This feature allows you to turn off the television after a pre-selected  
number of minutes.  
 
Menu Operations  
* In this manual, the OSD (On Screen Display) may differ from your TV  
These are examples to illustrate the TV's operation.  
Press TV/AV to select the input source. The menu for each source may be  
different .  
1. Press MENU button to display the main menu, and VOL+/VOL-to select the  
main menu .  
2. Press CH+/CH- to scroll through the parameters  
3. Press VOL+/VOL- buttons to make changes to the parameters  
4. Press the EXIT button to exit the menu  
Picture Menu Options  
Picture quality can be adjusted for any input separately .  
The picture qualityon the screencan be adjustedas follows:  
1. Press MENU button and VOL+/VOL- until the followingmenu appears  
on the screen.  
2. Press CH+/CH- button to enterthe picture menuand to goup and downto  
select the desired option .  
PC MENU  
COMPONENT MENU  
PICTURE  
PICTURE  
BRIGHTNESS  
CONTRAST  
SHARPNESS  
COLOR  
NOISE REDUCTION  
H POSITION  
V POSITION  
30  
30  
2
BRIGHTNESS  
CONTRAST  
SHARPNESS  
COLOR TEMP  
30  
30  
2
30  
COOL  
MID  
0
0
30  
COLOR TEMP  
NEUTRAL  
TV/AV/S-VIDEO MENU  
PICTURE  
BRIGHTNESS  
CONTRAST  
50  
50  
2
50  
MID  
SHARPNESS  
COLOR  
NOISE REDUCTION  
NEUTRAL  
50  
COLOR TEMP  
HUE  
Only available inNTSC system  
Note: Symbols ontop of themenu in thismanual may differ from theactual set display  
 
Menu Operations  
Picture Menu Options continued  
3.Press VOL+/VOL- button to increase and decrease the level to adjust the  
selected option to your preference .  
4. Repeat step 2 and step 3 until desired picture quality has been achieved .  
Function:  
BRIGHTNESS :Adjust the brightness of the picture . By increasing the level, it  
will lighten the dark parts of the picture and by decreasing the level it will  
darken the lighter parts of the picture.  
CONTRAST : Adjust the contrast of the picture . The contrast becomes higher as  
the number increases.  
SHARPNESS : Adjust the amount of the detail enhancement , the image  
sharpness rises as the number increases (By increasing the level, it will show  
cleaner and clearer images and by decreasing the level, it will make the picture  
smoother).  
COLOR : Press VOL+/VOL- to adjust the color  
HUE : Adjust the tone of the picture . This will appear and can be adjusted only in  
NTSC mode  
COLOR TEMP : Press to select the color temperature from NEUTRAL/WARM/COOL  
NOISE REDUCTION: Adjust the quality of the picture by selecting OFF,LOW,MID,  
HIGH.  
H POSITION : Picture horizontal adjust  
V POSITION : Picture vertical position adjust .  
Sound Menu Options  
Sound can be adjusted for any input as follows:  
1. Press MENU and VOL+/VOL- button until the following menu appears on  
the screen  
SOUND  
50  
50  
30  
70  
VOLUME  
BALANCE  
BASS  
TREBLE  
AUDIO MODE  
AVL  
VOICE  
OFF  
 
Menu Operations  
Sound Menu Options continued  
You can adjust sound options to the levels you prefer.  
2. Press CH+/CH- button to enterthe audio menuand to goup and downto  
select the desired option .  
3.Press VOL+/VOL- button to increase and decrease the level to adjust the  
selected option toyour preference .  
4. Repeat step 2 and step 3 until desired sound quality has been achieved .  
Function :  
VOLUME :Adjust the volumeof your TV  
BALANCE : Adjust the balanceof the audiooutput from leftto right . When  
indication value of balance increases toward 100 , sound from the left speaker  
becomes weaker . When indication valueof balance decreasestoward 0 ,  
sound from the right speaker become weaker .  
BASS : Adjust the bass of the sound . Can only be adjusted under PERSONAL mode .  
TREBLE : Adjust the trebleof the sound. Can onlybe adjusted underPERSONAL  
mode .  
AUDIO MODE : Press VOL+/VOL- to select amongPERSONAL, VOICE, MUSIC  
and THEATRE .  
AVL: Automatic Volume Limit Control reduces the effect of high volumes by  
limiting the same volume peaks across all channels .  
 
Menu Operations  
Function Menu Options  
Menu Language Selection:  
The OSD menus can be shown onscreen in the various languages. First select the  
system language.  
1. Press MENU button and VOL+/VOL- until the followingmenu appears  
on the screen.  
FUNCTION  
INPUT SOURCE  
LANGUAGE  
CC MODE  
TV  
ENGLISH  
OFF  
CC CAPTION  
PARENTAL  
OFF  
BLUE SCREEN  
ASPECT RATIO  
RESET  
ON  
FULL SCREEN  
2. Press CH+/CH- button to enterthe function menuand to goup and downto  
select the desired option .  
3.Press VOL+/VOL- button to increase and decrease the level to adjust the  
selected option toyour preference .  
4. Repeat step 2 and step 3 until desired settings have been achieved .  
Functions:  
1. INPUT SOURCE : Displaycurrent mode . There are TV , AV ,S-VIDEO, PC,  
COMPONENT to display .  
2. LANGUAGE :Press VOL+/VOL- to select the OSD language.  
3. CC MODE:Press VOL+/VOL- to select amongOFF, ON WHEN MUTE, ON.  
OFF: Means theCC MODE isturned off.  
ON WHEN MUTE: Means there will be CC CAPTION when the sound is mute.  
ON: Means the CC MODE is turned on.  
4. CC CAPTION :Press VOL+/VOL-buttons to selectthe Closed Captionoptions.  
Closed Captioning helpsthe hearing impairedwith the broadcastprogram,  
as well as helping children learn how to read. A builtin decoder displays the  
audio portion of a program as text on the screen when this option is selected.  
OFF: When OFFis displayed onTV, it means CCCAPTION is turnedoff.  
CC1: When CC1is displayed on TV means CC CAPTION is turned on.  
CC2 to CC4: For other modes of video related broadcast information.  
TT1: For program guide andother information displayedby broadcasters.  
(This blocks alarge portion ofthe picture onyour screen).  
 
Menu Operations  
Function Menu Options Continued  
TT2 to TT4 :For other modes of information displayed by broadcasters.  
(This blocks a large portion of the picture on your screen).  
IMPORTANT: Closed captioning availability entirely depends on broadcasters  
supplying the signal. Therefore, closed captioning might not always be  
available and language availability will differ by broadcast.  
Note: Select CC1 for full translation of the primary language such as English in  
your area. Select CC2 for secondary language translation such as French or  
any other language that may be broadcast in your area.  
5.BLUE SCREEN: Press VOL+/VOL- to select ON or OFF. To set ON, the screen  
will turn blue after 3 seconds if there is no signal.  
6.ASPECT RATIO: Press to select display mode.(FULL SCREEN and ZOOM  
for model HLA15; FULL SCREEN ,4:3,16:9,CINEMAand ZOOM for model  
HLA19)  
7. RESET : Press VOL+ to reset some settings to the factory default .  
Adjust Menu Options  
1. Press MENU and VOL+/VOL- button until the following menu appears on the  
screen  
ADJUST  
AUTO CONFIG  
PHASE  
CLOCK  
H POSITION  
V POSITION  
0
50  
50  
50  
Note: This menu appears only in PC mode .  
2. Press CH+/CH- button to enter the adjust menu and to go up and down to  
select the desired option .  
3.Press VOL+/VOL- button to increase and decrease the level to adjust the  
selected option to your preference .  
4. Repeat step 2 and step 3 until desired quality has been achieved .  
Functions:  
AUTO CONFIG : Automatically adjusts picture location frequency and phase  
parameters .  
PHASE : Removes any horizontal distortion and clears or sharpens the displayed  
characters .  
CLOCK : Adjust the TFT-LCD to match the PC input source clock frequency  
 
Menu Operations  
H POSITION : Picture horizontal position adjust  
V POSITION : Picture vertical position adjust .  
Tuning Menu Options  
1. Press MENU and VOL+/VOL- button until the following menu appears on the  
screen  
TUNING  
CHANNEL  
1
CHANNEL LABEL  
CHANNEL LOCK  
SKIP  
OFF  
OFF  
ON  
AFC  
FINE TUNE  
ANTENNA  
AUTO PROGRAM  
CATV  
Note: This menuappears only inTV mode .  
2. Press CH+/CH- button to enter the tuning menu and to go up and down to  
select the desired option .  
3.Press VOL+/VOL- button to increase and decrease the level to adjust the  
selected option to your preference .  
4.Repeat step 2 and step 3 until desired settings have been achieved .  
Functions:  
1. CHANNEL : Press VOL+/VOL-to go up and down to set the channel position.  
The display will show the current playing channel.  
Channel Coverage by Antenna:  
Antenna Type  
VHF  
UHF  
Channel Range  
2-13  
14-69  
CATV  
1-125  
2.CHANNEL LABEL: Press VOL+ to enter it , then press VOL+/VOL- to select the  
position you want to edit and press CH+/CH- to input the emblem such as character  
and so on.(There are 8 position for you to edit totally)  
3.CHANNEL LOCK: Allows you to lock the channel inputs if ON is selected.  
 
Menu Operations  
Tuning Menu Options Continued  
4.SKIP : If you want skip a channel , press VOL+/VOL- to select ON , and this  
channel will be skipped next time when you press CH+/CH- . You can press  
the digit buttons to select the channel . If you want to restore the channel , select  
OFF.  
5. AFC : Auto frequency control. Select ON toimprove image quality .  
6. FIN E TUNE : If the image and / or sound received is not very good , you can  
press CH+/CH- to select FINE TUNE in the menu . Then , press VOL+/VOL-  
button to adjust and improve the image quality. Do notuse this feature unless  
reception is poor.  
7. ANTENNA: Press VOL+/VOL- button to select AIR (VHF and UHF) and CATV  
reception preference.  
8. AUTO PROGRAM : Auto search and program channels .Press the VOL+ button to  
start to search the channel and the following menu will appears on the screen:  
AUTO PROGRAM  
NO  
YES  
Press VOL+/VOL- or CH+/CH-to select YES or NO, and MENU to confirm.  
You could press MENU or EXIT to stop the search.  
Note: The AUTO PROGRAM function will scan the channels on the selected  
ntenna input. If the TV is connected to cable, please select CATV under  
' ANTENNA ' sub menu.  
Parental Menu Options  
1. Press the MENU and VOL+/VOL- button until FUNCTIONmenu appears  
on the screen .  
2. Press CH+/CH- button to select PARENTALand VOL+ to enter.  
PASSWORD----  
3. Then input the password 0000. It will bring parental menu display on the  
screen. You will see the ollowing menu on your screen:  
PARENTAL  
CHILD LOCK  
MPAA  
PG RATING  
PG CONTENTS  
CAN. ENGLISH  
CAN. FRENCH  
CHANGE PASSWORD  
OFF  
PG  
TV-14  
--DV--  
C8+  
8+  
 
Menu Operations  
Parental Menu Options Continued  
This function enables you to block certain TV channels in accordance to the  
requirements established by the FCC.  
2. Press CH+/CH- button to enter the PARENTAL menu and to go up and down to  
select the desired option .  
3.Press VOL+/VOL- button to go into PG RATING and MPAA  
Press VOL+/VOL- button to setthe CHILD LOCK ON and PARENTAL LOCK OFF.  
4. Repeat step 2 and step 3 until desired quality has been achieved .  
CHILD LOCK: Child Lock off means the lock function is turned off . If the  
Child Lock is in "off" mode then function will not be active to accept the  
Parental Guidance signal. Child Lock on means the lock function is turned on. If the  
lock is in the "on" mode then it actively accepts the Parental Guidance signal.  
MPAA: When MPAA rating is selected, you can select OFF/G/PG/PG 13  
R/NC17/X .  
PG RATING:Select the TV Rating option. You can select from OFF/TV-Y/TV-Y7/  
TV-G/TV-PG/TV-14/TV-MA.  
PG CONTENTS: Press to set the grade of the program . When there is this  
grade of program , this program will not be display .  
CAN. ENGLISH: Select this option. You could select from OFF/E/C/C8+/G/PG/  
14+/18+ .  
CAN. FRENCH: Select this option. You could select from OFF/E/G/8+/13+/16+/  
18+ .  
CHANGE PASSWORD: The "Default Password" preset by the manufacturer is  
"0000" . Ifyou want to change the preset password to your own password, just  
choose any four digits that can be easily remembered and set. Once you set  
password for a particular channel, that channel will be blocked.  
 
Menu Operations  
Parental Menu Options Continued  
PARENTAL LOCK TECHNOLOGY:  
The "P.L. Technology" allows you to use U.S. and Canadian Movies and TV  
PROGRAMS Guide ratings to block certain types of TV programs and movies.  
To clearly understand TV program rating codes, read the following information:  
U.S. TV Program Ratings  
NR: Not Rated-this means that programs are not rated or rating does not apply.  
TV-Y: For all children - these types of rated programs are designed for a very young  
audience, including children from ages 2-6.  
TV-Y7: Directed towards older children - this type of rated programs may include  
comedic violence of mild physical, or may frighten children under the age of 7.  
TV-G: General audience - these types of rated programs contains little or no  
violence, no strong language, and little or no sexual dialogue and situations.  
TV-PG:Parental Guidance Suggested-this type of rated programs may contain  
limited violence, some suggestive sexual dialogue and situations, and rare  
language.  
TV-14: Parents strongly cautioned-these types of rated programs may contain sexual  
content, strong language and more intense violence.  
TV-MA:Mature audience only these types of rated programs may contain sexual  
violence, explicit sexual content and profane language.  
FANTASY VIOLENCE: This type of rated programs contains Fantasy and cartoon violence.  
VIOLENCE: This type of rated programs contains violence.  
SEX: This type of rated programs contains sex.  
LANGUAGE: This type of rated programs contains offensive language.  
DIALOGUE: This type of rated programs contains dialogue with sexual content.  
 
Menu Operations  
Parental Menu Options Continued  
To understand clearly about movie rating codes, read the following list:  
U.S. Movie Rating Chart  
NR: This means movie is not rated yet. It is pending government rating approval.  
G:  
General Audience-this type of movie rating means all ages admitted to see  
the movie.  
PG 13:Parents Strongly Cautioned - this type of movie rating means some material  
may not be appropriate for children under13.  
R:  
Restricted- This type of movie rating means children under 17 of age require  
to be with parent or guardian.  
NC 17:This type of movie rating means no one 17 and under admitted.  
X: This type of movie rating means adults only.  
To clearly understand Canadian program rating codes, read the  
following list:  
Canadian English Rating Chart  
E: These types of programs are exempt from the rating system. Exempt  
programming includes: news, sports, documentaries, talk shows, music  
videos, and variety of other programs.  
C: This type of programming is intended for children under age 8. There is no  
offensive language, nudity or sexual content.  
C8+:These types of rated programs are generally considered acceptable for children  
8 years and over. There is no profanity, nudity or sexual content.  
G: These types of rated programs are generally suitable for all audiences.  
PG: Parental Guidance Suggested -in these types of rated programs, some material  
may not be suitable for children.  
14+: In these types of rated programs, some content may not be suitable for viewers  
under the age of 14.Parents are strongly cautioned not to have their children  
view 14+ rated programs by pre-teens and early teens.  
18+: Adults Only-these types of rated programs are only for adult viewers only.  
 
Troubleshooting Guide  
To assist in location possible faults use help guide below.  
Troubleshooting  
Verify thatthe television isproperly plugged in.  
Verify thatthe television isproperly supplied withpower.  
Verify thatelectricity is available.  
No picture, no sound  
Verify that correct signals are input.  
Press TV/AV button to change signal input to TV input.  
Restart the television of power supply is interrupted.  
Blank screen  
Press MUTE buttonand verify ifMute mode ison.  
Switch to anotherchannel and verifyif the sameproblem  
happens.  
No sound  
Press VOL+ buttonto see ifthe problem canbe solved.  
Verify thatsound system isfunctional. Refer tochapter on  
adjusting.  
Poor sound  
Verify thatcorrect channel isselected.  
Adjust the antenna.  
Make adjustments byFINE TUNE  
No picture in some  
channel  
Verify that the same problem exists in other channels.  
Check picture and sound systems.  
Refer to relative instructions in the Manual for color  
adjust.  
No color for some channel  
program (black and white)  
Verify thatthe antenna iscorrectly connected.  
Verify thatthe antenna isin good condition.  
Make fine adjustmentof channel.  
Spots with some or  
all pictures  
Disconnect the televisionfrom power supplyand, 10  
seconds later, reconnect to thepower supply.  
If the problemstill exists, contactan authorized  
service depot fortechnical assistance.  
Abnormal functioning  
Note:  
1.If the fault can not be repaired using the above guide consult with your local authorized  
service center.  
2.The TV set must only be repaired by a qualified registered service person. Never attempt to  
remove the backcover as theTV set has dangerous voltageslevels inside thatmay be  
fatal or causefire.  
 
Specifications  
Specifications of the television that you have just purchased may  
vary from the information in this table due to technical innovations.  
Model  
HLA15  
HLA19  
Picture, sound  
system  
NTSC-M, PAL/N, PAL/M  
1.5W+1.5W  
Audio output  
AV input PC input S-VIDEO input PC audio input  
Headphone output YPbPr input Antenna input  
External input port  
~100-240V 50/60Hz  
Power requirements  
Power consumption  
Temperature  
50W  
60W  
Working:+5 ~+35  
Storage:-15 ~+45  
Working:20%~80%  
Storage:5%~90%  
Humidity  
Remote control  
Batteries  
User manual  
Accessories  
NOTE  
Design and specifications are subject to change without notice.  
Dimensions quoted in this manual are approximate.  
 
V0.1  
0090508051E  
 

Grace MP3 Docking Station SCN300W User Manual
Graco Baby Accessories PD121385B User Manual
Haier Freezer BD 100H User Manual
Harman Kardon CD Player HD 970 User Manual
Heat Glo LifeStyle Door CERONA 36 User Manual
Heath Zenith Work Light SL 5503 User Manual
Heatiator Indoor Fireplace GB4336 User Manual
HP Hewlett Packard Server 776978 S01 User Manual
IFoundry Systems Network Card IFSYS 8004 User Manual
I O Display Systems DVD Player SRDVD 100U User Manual