Haier Flat Panel Television HLT71 User Manual

USER MANUAL  
HLT71  
7'' DIGITAL LCD TV  
IMPORTANT  
READ THESE INSTRUCTIONS  
BEFORE USE AND RETAIN  
FOR FUTURE REFERENCE.  
 
WARNINGS:  
This TV monitor should be operated only at the adaptor  
Controls  
supplied.  
Do not try to repair the TV monitor yourself as it contains  
no user-serviceable parts. The TV monitor should only be  
repaired by a qualified technician.  
Stop using the TV monitor if the cabinet is damaged.  
Have it checked by a service technician.  
Put your monitor only in a clean, dry environment. Unplug  
the monitor immediately if it gets wet, and consult your  
service technician.  
Always unplug the monitor before cleaning it. Clean the  
cabinet with a clean, dry cloth. Apply non-ammonia-based  
cleaner onto the cloth, not directly onto the glass screen.  
Keep the TV monitor away from magnetic objects, motors,  
TV sets, and transformers.  
Do not place heavy objects on the cable or power cord.  
Care and Maintenance  
3 4 5 6 7 8 9 10 11 12 13  
Avoid exposing your monitor directly to sunlight or other  
heat sources. Place your TV monitor away from the sun  
to reduce glare.  
14  
Put your TV monitor in a well-ventilated area. Do not  
place anything heavy on top of your monitor.  
Make certain that your TV monitor is installed in a clean  
and moisture-free area.  
15  
16  
17  
18  
Safety Tips  
1
2
If smoke, abnormal noise or odor comes out of your TV  
monitor, switch off the power immediately and call your  
service center.  
Never try to repair the TV monitor yourself. Always call  
your service center or a qualified technician to fix it.  
Do not watch during driving, it is dangerous and is illegal!  
Note  
This user's manual contains graphics and information that is  
for reference purposes only and is subject to change without  
notice.  
20  
Power requirements  
You may use the DC adaptor or the Cigarette lighter adaptor  
(NEGATIVE GROUND ONLY) supplied for the power source.  
Battery installation  
Attach the rechargeable battery pack to the bottom of the  
TV Player unit as illustrated below:  
19  
1. Power on/off switch  
2. DC input jack  
3. LCD display  
4. Speaker  
5. Standby/Power indicator  
6. Menu  
7. Channel -  
8. Channel +  
9. Auto/OK  
10. Volume - (  
11. Volume + (  
12. Mode  
right key in menu function)  
left key in menu function)  
13. Remote control sensor  
14. RF in  
15. Video in jack  
BATTERY  
BATTERY COVER  
16. Audio left in jack  
17. Audio right in jack  
18. Phones jack  
19. Self-support Bracket  
20. Battery compartment  
NOTE:  
This unit works either on the battery pack supplied or on DC  
power: unplug the DC Power adapter from the DC input jack  
to run off the battery pack (after fully charged); plugging the  
DC Power adapter while the battery pack is attached  
initiates the charging of this battery. Please insert the battery  
correctly. Generally, it takes about 6 hours to charge a dead  
battery pack full. A full charged battery pack can endure  
approximately 2 hours of continuous playback.  
2
 
Remote control operation  
HOW TO USE ANTENNA  
Directly connect external movable antenna to RF in, may  
also connect roof antenna directly.  
POWER  
MUTE  
For better reception:  
1
10  
11  
ZOOM  
EPG  
PICTURE  
MENU  
MTS  
Adjust the direction/position of the antenna. The signal  
strength depends on the area of reception. If the signal is  
too weak, poor or no reception is possible. This is not a  
malfunction.  
2
3
4
5
SLEEP  
EXIT  
12  
13  
ATTENTION:  
Do not rotate the antenna in counter direction after fixing, it  
may get loose & effect the channel reception.  
ENTER  
6
14  
15  
16  
TV/AV  
INFO  
CH+  
1
4
7
2
5
8
3
6
9
7
17  
CH-  
18  
19  
20  
0
8
9
+
VOLUME  
Note:  
a) Point the remote control unit from no more than about  
5m from the remote control sensor and within about  
60° of the front of the TV monitor.  
b) Do not press the button too quick. Press the button  
after the previous operation is completed.  
1. MUTE: Used to toggle between normal & muted audio.  
2. PICTURE: Press this button to select the picture display  
effect between Dynamic, soft, personal or standard.  
3. MTS: Press to select the audio output language during  
DTV mode if there are multi languages available, during  
ATV mode, press this button to select audio output like  
mono & stereo.  
4. MENU: Press this button to access the menu interface.  
5. SLEEP: Use to auto power off by setting sleep timer.  
6. NAVIGATION buttons: Press to select the options under  
OSD setting interface or alter the settings in a menu.  
7. (0~9 ): Enter numeric values and to select the channel or  
program directly by entering its number.  
TV OPERATION  
GET STARTED  
Be sure the TV antenna is connected to the set properly.  
Plug the AC adaptor to the power source to power on  
the TV set.  
Slide power on/off switch to on position.  
Press the TV/AV button on the remote or MODE button  
on the main unit to select TV Mode.  
Press AUTO/OK on the unit. Then select YES & press  
AUTO button to program the channels onto the memory.  
PROGRAMING BY REMOTE:  
8. : Press to go to previously selected channel.  
9. VOL-: Press this button to decrease the speaker volume.  
10.POWER: Press this button to set the player to standby  
on or off state( If the main power of the set is on).  
11. ZOOM: Used to select the desired display mode wide or  
normal. .  
12. EXIT: Exit the menu interface.  
13. EPG: Press this button to skim over TV programs guide.  
14. OK/ENTER: Confirm the selection.  
15. TV/AV: Select the desired signal input mode.  
16. INFO: Press this button to display current program  
information.  
17. CH+: Press this button to increase the channel number.  
18. CH-: Press this button to decrease the channel number.  
19. - : Used to directly input TV channels.  
Press the MENU button on the remote, and then select the  
satellite image by using the key. Then press down arrow  
button ( ) to select antenna function. Change to Air or  
Cable by using button, depending upon the type of  
connection. Then scroll to Auto Scan and press button  
twice, TV will start auto programing function taking all the  
available channels into memory.  
NOTE: Auto Scan function has to be done for TV to capture  
channels initially.  
PROGRAMING FROM UNIT  
Turn the TV on and press menu button, scroll to satelite  
image by pressing Vol + ( ), and then press channel - (  
to select antenna function. Press Vol + to choose Air or  
cable reception. Then press CH - ( ) to select Auto scan  
function and press Vol + ( ) and choose start scan by  
using CH - ( ) and press Vol + ( ). The unit will start  
program.  
)
20. VOLUME +: Press this button to increase the speaker  
volume.  
SEARCH A PROGRAM  
Press CH UP/DOWN button once, the channel number  
changes. A desired channel can be reached using these  
two keys.  
NUMERIC button on the remote can facilitate you to  
select a specific channel. If the channel number exceeds  
10, input first digital unit, then another digital unit;  
3
 
Note: this ATSC&Analog TV receiver can store the  
channels from 2~69, and the maximum of each channel  
has 8 programs. To select the desired programs by using  
- button and numeric buttons.  
Do as follows:  
To select CH 13 NO. 2  
OSD Duration  
Sleep Timer  
Time Zone  
60 Sec  
Off  
Central  
Off  
Daylight Saving Time  
Clock  
----/--/-- --/--  
Press 1 and 3, then press - and input 2.  
Once the input is done, it will start broadcasting the selected  
channel immediately.  
UP/DOWN  
ADJUST MENU:EXIT  
OSD Duration: it is used to set the OSD display duration.  
Sleep Timer: it is used to set the sleep timer to auto power  
off the set.  
Time Zone: it is used to select time zone from different  
region.  
ADJUST THE VOLUME  
Too loud the voice will damage your ears, to adjust the  
volume, use the VOLUME UP/DOWN buttons on the main  
unit or on the remote control.  
Daylight Saving time: it is used to advance one hour of the  
daylight time in summer in order to save the power.  
Clock: during DTV mode, it is used to show code create  
date.  
AUDIO EFFECT OPTIONS  
This TV set is with two speakers inside the front panel,  
which are enabled immediately it is powered on.  
TV SETTING MENU  
Menu Language  
Color Mode  
English  
Press TV/AV button on the remote or MODE button on the  
main unit to select TV mode, then Press once the MENU  
button, the screen will pop up a setting menu;  
Normal  
Wide  
Zoom Mode  
Closed Caption  
Restore Setting  
use the NAVIGATION LEFT/RIGHT buttons to select among  
the setting options, then press NAVIGATION UP/DOWN  
button to enter the sub menu, again use NAVIGATION  
LEFT/RIGHT button to select the desired option or adjust  
and press OK/ENTER Button to confirm the item to be set;  
Press MENU button to go to previously menu and press  
EXIT button to exit the menu interface.  
UP/DOWN  
ADJUST MENU:EXIT  
Menu Language: it is used to change menu language.  
Color mode: it is used to change the color mode of screen.  
Zoom Mode: it is used to select the display type.  
Closed Caption: it is used to select the broadcasting  
program provides closed caption. There are three options as  
below:  
CC mode: use to select on, CC on Mute, off.  
Basic Selection: select among from CC1, Cc2, CC3,  
CC4,Text1, Text2, Text3 and Text4.  
Picture Mode  
Contrast  
Brightness  
Sharpness  
Tint  
Personal  
62  
53  
50  
0
60  
Color  
Advance Selection: service 1, Service 2, Service 3, Service  
4, Service 5, Service 6,  
UP/DOWN  
ADJUST MENU:EXIT  
Restore Setting: select this option to restore the factory  
setting.  
Picture mode: it is used to select the desired picture mode.  
Contrast: it is used to adjust the contrast effect according to  
your own favorite.  
Brightness: it is used to adjust the brightness effect  
according to your own favorite.  
Sharpness: it is used to adjust the sharpness according to  
your own favorite.  
Tint: it is used to adjust the tint effect according to your own  
favorite.  
Color: it is used to adjust the color according to your own  
favorite.  
Antenna  
Air  
Auto Scan  
Show/Hide  
Favorite  
Channel No.  
Channel Label  
UP/DOWN  
ADJUST MENU:EXIT  
Antenna: it is used to select the Antenna type CATV or air.  
Auto Scan: use this function to auto scanning and stored  
tuned channels. Select auto scan option, then press  
NAVIGATION RIGHT button to access the submenu, select  
the desired Cable system and then enter the auto scan  
option to begin auto scan.  
Balance  
0
Audio Language  
English  
Show/Hide:it is used to show or hide the programs  
according to your own favorite.  
UP/DOWN  
ADJUST MENU:EXIT  
Favorite: it is used to select your favorite programs.  
Channel NO.: Select the desired program from this option.  
Channel Label: it is used to edit the name of the selected  
program.  
Balance: it is used to adjust the balance effect according to  
your own favorite.  
Audio language: it is used to select the desired audio output  
language.  
4
 
Connecting to the DVD/VCD AV terminals  
To power outlet  
To video input connector (yellow)  
To audio input connectors (red, white)  
Video/audio cable  
AC power cord  
Video  
L
R
Symptom  
Remedy / Possible of causes  
No picture and sound  
Check the power supply.  
Check the power switch and make sure it is at the ON position.  
Make sure the channel is properly selected.  
External antenna is used for poor reception area.  
No picture  
No sound  
Check whether the volume is switch to low level or muted?  
Headphone is inserted?  
Picture is too dark  
Picture is unstable  
Check the brightness and contrast settings.  
Adjust the direction, length of the antenna.  
Signal is too weak.  
Double image  
Antenna angle is not correct.  
Signal rebound from adjacent building etc.  
"Snowy" on the screen  
No colour  
Power interference.  
Make sure the system setting are correct.  
ATTENTION  
Due to the inherent nature of the Portable Televisions, this unit may not receive some channels, or may not have a  
clear reception. This may be currently due to the weak nature of the digital over the air signals, or the location of  
the unit from the transmitting Antenna.  
5
 
Warranty  
This Haier brand product, when shipped in its original  
container, will be free from defective workmanship and  
materials, and agrees that it will, at its option, either  
repair the defect or replace the defective product with a  
new or re-manufactured equivalent at no change to the  
purchaser, for parts or labor for the periods set forth  
below:  
Responsibility of Haier to the purchaser with respect to  
the product, and shall  
constitute full satisfaction of all claims, whether based  
on contract, negligence, strict duality or otherwise. In no  
event shall Haier be liable, or in any way responsible for  
any damages or defects in the product which were  
caused by repairs or attempted repairs performed by  
anyone other than an authorized service center or  
dealer; nor shall Haier be liable, or in any way  
responsible for incidental or consequential economic or  
property damage. Some states do not allow the  
exclusion of incidental or consequential damages, so  
that above exclusion may not apply to you.  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL  
RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS  
WHICH VARY FROM STATE TO STATE.  
This warranty does not apply to the appearance of the  
product or the exterior of the product, which has been  
damaged or defaced, altered or modified in design or  
construction. It does not apply to the additional  
excluded items set forth below:  
The warranty commences on the date the item was  
purchased and the original purchase receipt must be  
presented to the authorized service center before  
warranty repairs are rendered.  
Warranty period for this product: 90 days for Labor, one  
year for parts.  
The limited warranty described herein is in addition to  
whatever implied warranties may be granted to  
purchasers by law. ALL IMPLIED WARRANTIES  
INCLUDING THE WARRANTIES OF MERCHANT  
ABILITY AND FITNESS FOR USE ARE LIMITED TO  
THE PERIOD(s) FROM THE DATE OF PURCHASE  
SET FORTH BELOW. Some states do not allow  
limitations on how long an implied warranty lasts, so the  
above limitation may not apply to you.  
Additional items excluded from warranty coverage: non-  
rechargeable batteries.  
Where to obtain service: For the location of the nearest  
Haier authorized service center or to obtain product  
literature, accessories, supplies or customer assistance,  
please call 1-877-337-3639.  
What to do to obtain service: ship or carry in your  
product to an authorized service dealer or center .Be  
sure to have proof of purchase.  
If you ship the product, be sure it ispackaged carefully.  
Haier America  
New York, NY 10018  
Neither the sales personnel of the seller nor any other  
person is authorized to make any warranties other than  
those described herein, or to extend the duration of any  
warranties beyond the time period described herein on  
behalf of Haier.  
The warranties described herein shall be the sole and  
exclusive warranties granted by Haier and shall be the  
sole and exclusive remedy available to the purchaser.  
Correction of defects in the manner and for the period  
of time described herein, shall constitute complete  
fulfillment of all abilities and  
6
 
Haier  
HLT71  
 

Graco Car Seat 1758573 User Manual
Graco Septic System 307884S User Manual
Grizzly Automobile Parts H6287 H6289 User Manual
Grundig Stereo System CDS 6580 A SPCD User Manual
Hamilton Beach Waffle Iron 840074500 User Manual
Health O Meter Scale 549KL User Manual
Honeywell DVR HRXD16 User Manual
HP Hewlett Packard Switch 2520G User Manual
Hunter Fan Stud Sensor 43658 User Manual
IBM Computer Drive MDS 9509 User Manual