Haier Flat Panel Television LE37K800 User Manual

LE26K800/LE32K800  
LE37K800/LE42K800  
LE47K800/LE55K800  
 
Characteristic Functions  
1. LCD panel with no glint and low radiation can ease eyes' fatigue and protect eyes.  
2. High-quality LCD with LED backlight panel is adopted with high brightness, high contrast, wide  
viewing angle, and super fast response time. Super fast response time can greatly eliminate the  
shadow of moving images.  
3. TV/Monitor with two in one and multiple input ports can easily switch among the modes.  
4. De-interlacing image disposal is adopted. Today's most advanced technique for movement  
compensation, can completely improve the saw tooth and vague edges of the athletic picture.  
5. There are four smart sound modes and four smart image modes.  
6. Dynamic contrast technology can obviously improve the definition and contrast of the picture  
7. Tuner for frequency synthesis can support full auto search and manual search.  
8. With perfect timing function, you can set time to turn off. It will be turned off in state of no signals,  
too.  
9. Auto Adjustment can help you to setup the image into the best performance in a few seconds  
instead of complicated adjustment in PC mode.  
10. Auto color balance adjustment technology can make the machine to reach the best color setting  
in PC mode.  
11. Support hi-definitionYPbPr and double HDMI.  
12. All functions can be realized with remote control, which is really a convenient operation.  
13. Power is designed to save energy.  
14. Input ports include VGA, YPbPr, HDMI, CVBS, USB and TV.  
15. Output ports include AV.  
16. Supports USB interface.  
Important Safety Instructions  
Thank you to choose the LCD TV with LED backlight made by our company, a valuable product with  
excellent quality and multiple functions. This machine will bring you more audiovisual enjoyment. Its  
design can insure user's safety. All machine are strictly tested before leaving factory. But incorrect  
use can lead to electric shock or fire. In order to insure safety and extend its life, please read below  
regulations carefully before using it and comply with the following safety instructions.  
When the following troubles occur, please pull out the plug and call the professional engineers to  
repair.  
A. The cable or plug is damaged.  
B. The product was fallen down or the case is damaged.  
C. Obvious abnormal situation occurs. In spite of correct  
operation according to the user manual but it still can't work  
normally.  
D. Some abnormal substances or liquid fall into it.  
E. Unusual sound or smell sends out.  
There is high voltage inside the machine but no parts which can  
be repaired by users themselves. In order to assure the people's  
safety, please do not open the case to repair it by yourself. If it is  
needed to repair, please contact qualified engineer to repair.  
Please put this machine in the place of well ventilation, instead  
of extremely hot, cool or moist, and direct sunlight.  
1
 
Important Safety Instructions  
The slots on the case is designed to release heat so as to assure that all inside components will  
not reach an extra high temperature and can work normally for a long time. Please do not cover  
the holes while place it.  
Unless there is good ventilation installation, please do not put  
this machine in inlaid device.  
Please do not place it on an unstable position so as to avoid  
falling off.  
Do not place the LCD TV near water source, like a bathtub,  
pool, washing machine, or moist cellar and similar environment.  
During a thunder rain weather, do not touch the power cord and  
antenna cable. Please pull out the power line and aerial plugs  
for preventing thunder and lightning damage to this machine.  
All cables can be connected or pull out only after power supply  
is turned off.  
The power cord must be taken off before you clean the machine.  
Do not use the liquid cleanser or aerosol cleanser. It is  
recommended to use a wet soft cloth to clean the machine. Do  
not use the alcohol, impregnant or ammoniac liquid to wipe the  
screen.  
If you will not use the machine for a long time, please pull out  
the power cord. Do not keep the sleeping mode for too long time.  
Read the manual and marking label before using the machine, and keep the user manual for  
later use.  
Don't use the attachments which are not recommended by the machine manufacturer as they  
may cause hazards.  
The power cord must be placed correctly so as to avoid be trample or crush.  
Please do not make the power socket overloaded or the power cord extended. Otherwise it will  
cause fire or electrical shock.  
The LCD panel is fragile and expensive. The surface of the panel is easy to be scratched. Please  
do not use the hard thing to knock, press, score the panel. Otherwise it will be harmful for the  
panel. The exchange cost is very high.  
All technical specification on this instruction book and outer package are subject to change  
without notice. If the instruction book has slight difference with actual operation, please take the  
actual operation as standard.  
When the MAINS plug or an appliance coupler is used as the  
disconnect device, the disconnect device shall remain readily  
operable.  
The machine should not suffer from waterdrop or watersplash,  
do not place the vessel with water (or other liquids) on it, for  
like this it is possibly to cause fire or electric shock.  
The attaching plug should be inserted into the power point completely, otherwise it may cause  
spark to bring fire.  
Please do not put candle, ash-tray, incense, inflammables or explosive nearby this machine.  
Please do not stretch into any sharp object, metal or liquid, or touch the signal attachment or the  
inner of radiation hole, in order to avoid short circuit and product damage, or possibly causing  
electric shock. Especially pay attention when there are children on the spot.  
2
 
Important Safety Instructions  
Please do not use the machine immediately when moving the machine from low temperature place  
to high temperature one, or install and use at the place of facing air conditioning, otherwise it may  
cause the condensation in the machine, to cause fault.  
Must be careful when moving this machine, avoiding being struck, especially pay attention to  
protect the screen part. In addition, if using handcart, must note the injury as the product is  
overturned from the handcart because of hard braking, overexerting and uneven ground.  
Technical Specifications  
The Technical Specifications for Final Product  
Panel size  
26"  
Max. Resolution  
Best Resolution  
Pixel Pitch  
Active Area  
Color  
1366×768  
1360×768@60Hz  
0.4215mm×0.4215mm  
575.769mm×323.712mm  
16.7M  
Power Supply  
Power Consumption of Speaker  
100V-240VAC 60/50Hz  
8W+8W  
Unpacking: 654×432×46mm  
Packing: 750×530×135mm  
Net Weight: 5.5Kg  
Gross Weight: 7.0Kg  
Excluding base  
Unpacking: 654×459×46mm Net Weight: 6.0Kg  
Packing: 850×530×145mm Gross Weight: 7.5Kg  
Unpacking: 654×459×46mm Net Weight: 6.5Kg  
Dimension (L×H×W) and Weight  
Including base  
Packing: 850×530×180mm  
Gross Weight: 8.0Kg  
Panel size  
32" (HD)  
32" (FHD)  
Max. Resolution  
Best Resolution  
Pixel Pitch  
Active Area  
Color  
1366×768  
1360×768@60Hz  
0.51075mm×0.51075mm  
697.685mm×392.256mm  
16.7M  
1920×1080  
1920×1080@60Hz  
0.36375mm×0.36375mm  
698.40mm×392.85mm  
1.06 Billion  
Power Supply  
Power Consumption of Speaker  
100V-240VAC 60/50Hz  
8W+8W  
Unpacking: 778×501×48mm or 789×505×49.3mm  
Net Weight: 9.0Kg  
Packing: 880×605×135mm  
Gross Weight: 11.0Kg  
Unpacking: 778×535×48mm or 789×541×49.3mm  
Net Weight: 9.5Kg  
Packing: 980×605×145mm  
Gross Weight: 11.5Kg  
Excluding base  
Including base  
Dimension (L×H×W) and Weight  
Unpacking: 778×535×48mm or 789×541×49.3mm  
Net Weight: 10.5Kg  
Packing: 1005×635×180mm  
Gross Weight: 12.5Kg  
3
 
Technical Specifications  
Panel size  
37"  
Max. Resolution  
Best Resolution  
Pixel Pitch  
Active Area  
Color  
1920×1080  
1920×1080@60Hz  
0.42675mm×0.42675mm  
819.36mm×460.89mm  
1.06 Billion  
Power Supply  
Power Consumption of Speaker  
100V-240VAC 60/50Hz  
8W+8W  
Unpacking: 898×572×47mm  
Packing: 1000×680×135mm  
Net Weight: 11.0Kg  
Gross Weight: 13.5Kg  
Excluding base  
Unpacking: 898×624×47mm Net Weight: 12.0Kg  
Packing: 1100×680×145mm Gross Weight: 14.5Kg  
Unpacking: 898×624×47mm Net Weight: 13.0Kg  
Packing: 1120×685×180mm Gross Weight: 15.5Kg  
Dimension (L×H×W) and Weight  
Including base  
Panel size  
42"  
Max. Resolution  
Best Resolution  
Pixel Pitch  
Active Area  
Color  
1920×1080  
1920×1080@60Hz  
0.4845mm×0.4845mm  
930.24mm×523.26mm  
1.06 Billion  
Power Supply  
Power Consumption of Speaker  
100V-240VAC 60/50Hz  
8W+8W  
Unpacking: 1008×634×48mm Net Weight: 15.0Kg  
Packing: 1110×745×135mm Gross Weight: 18.0Kg  
Unpacking: 1008×684×48mm Net Weight: 16.0Kg  
Packing: 1210×745×145mm Gross Weight: 19.0Kg  
Unpacking: 1008×684×48mm Net Weight: 17.0Kg  
Packing: 1230×760×180mm Gross Weight: 20.0Kg  
Excluding base  
Dimension (L×H×W) and Weight  
Including base  
Panel size  
47"  
Max. Resolution  
Best Resolution  
Pixel Pitch  
Active Area  
Color  
1920×1080  
1920×1080@60Hz  
0.5415mm×0.5415mm  
1039.68mm×584.82mm  
1.06 Billion  
Power Supply  
Power Consumption of Speaker  
100V-240VAC 60/50Hz  
8W+8W  
Unpacking: 1124×702×48mm Net Weight: 18.5Kg  
Packing: 1275×855×195mm Gross Weight: 22.5Kg  
Unpacking: 1124×756×48mm  
Excluding base  
Including base  
Dimension (L×H×W) and Weight  
4
 
Technical Specifications  
Panel size  
55"  
Max. Resolution  
Best Resolution  
Pixel Pitch  
Active Area  
Color  
1920×1080  
1920×1080@60Hz  
0.63mm×0.63mm  
1209.6mm×680.4mm  
1.06 Billion  
Power Supply  
Power Consumption of Speaker  
100V-240VAC 60/50Hz  
8W+8W  
Unpacking: 1301×807×48mm Net Weight: 22.0Kg  
Excluding base  
Including base  
Dimension (L×H×W) and Weight  
Packing: 1470×975×205mm  
Unpacking: 1301×861×48mm  
Gross Weight: 27.0Kg  
Operating Environment:  
Temperature: 5℃~40℃  
Humidity: 10%85% Atmosphere Pressure: 86kPa104kPa  
Storage Environment:  
Temperature: -20℃~55Humidity: 5%95%  
Atmosphere Pressure: 86kPa104kPa  
Technical Specifications for TV  
1.Supported Systems: PAL+SECAM or PAL+NTSC  
3.TV(RF): 75Ω Imbalance  
2.Storage channels: 199  
4.AV Video-Input: 75Ω,1VP-P, RCA  
5.AV Audio-Input: 20KΩ, 500mV RMS  
6.YPbPr/HDMI Video Input: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p  
VGA Display Mode  
26" / 32"(HD)  
32"(FHD) / 37" / 42" / 47" / 55"  
NO.  
1
Mode  
Resolution  
720×400  
Refresh  
70Hz  
60Hz  
60Hz  
60Hz  
60Hz  
60Hz  
60Hz  
60Hz  
NO.  
1
Mode  
Resolution  
720×400  
640×480  
800×600  
1024×768  
1360×768  
Refresh  
70Hz  
60Hz  
60Hz  
60Hz  
60Hz  
VGA  
VGA  
2
640×480  
2
SVGA  
XGA  
3
800×600  
SVGA  
XGA  
WXGA  
3
4
1024×768  
1280×720  
1360×768  
1600×900  
1920×1080  
4
5
5
6
Recommended mode:1360X768@60Hz  
WXGA  
7
WUXGA  
8
Power Management  
Recommended mode:1920X1080@60Hz  
This product is complied with EPA Energy Star Standard and compatible with VESA DPMS  
standard. Details are listed as follows:  
Power Consumption  
Mode  
LED Indicator  
26"  
32"  
37"  
42"  
47"  
160W  
0.5W  
55"  
190W  
0.5W  
On  
Standby  
Off  
Lighting  
75W  
0.5W  
75W  
0.5W  
100W  
0.5W  
110W  
0.5W  
Note: All the specifications in the user manual or on the packing carton may be changed without  
additional notice.  
Packing Listing  
1. LCD TV 2. User Manual 3. Power Cable (or the TV attached with power cable)  
4. Remote Control  
5
 
Installation & Connection  
Base Assembly Installation  
Fasten the base supporting cover to the back cover of machine (It needn't to operate this step when  
base support cover had been installed.), and then Insert base assembly to supporting shield hole of  
complete machine back cover as illustrated direction of arrow, to make supporting shield and  
supporting hole center in the same line, finally fasten the screw.  
Screws  
Screws  
Screw  
Base supporting cover  
Remarks: The base and machine appearance may not same as the picture, specific in accordance  
with work order  
Antenna Connection  
It is better to use outdoor antenna or CATV cable if you want to watch the colorful and hi-definition  
pictures. Attention: Please turn off TV power before the outdoor antenna is connected to the  
TV signal input port. Outdoor antenna can't be located near the high  
voltage cables. Please pull out the plug of outdoor antenna to avoid  
thunder shock in thunder weather.  
CVBS, DVD Player or other  
machine with CVBS/S-Video.  
RF  
Y
Yellow (VIDEO)  
W White(AUDIO-L )  
Red (AUDIO-R)  
R
To power socket  
(AC 100-240V, 60/50Hz)  
Power cable  
W
R
Y
Audio/Video machine  
with HDMI interfaces.  
6
 
Installation & Connection  
Power Connection  
Plug one end of the power cord into the input port of the machine's power supply and then insert the  
other end into the socket of the electrical source (AC 100V-240V, 60/50Hz).  
Notes:  
1. When connecting the power cord, be sure to turn  
off the machine and other equipment's power.  
2. If a long time at leisure, please disconnect it from  
power supply  
3. This TV must be connected to a three pin socket  
outlet for safety.  
Computer Connection  
USB  
Y
Yellow (VIDEO)  
Please connect one end of VGA cord with the output  
port of the computer (available for both desktop or  
laptop computer), and another end of VGA cord with  
the input port of the VGA on its rear cover.  
W White(AUDIO-L )  
R
G
B
Red (AUDIO-R, Pr/Cr)  
Green (Y)  
Blue (Pb/Cb)  
R
HDMI Digital Port Connection  
Connect external HDMI high signal source to HDMI  
digital input port of this machine through HDMI  
digital connector cable; push"SOURCE" button to  
select HDMI signal source. (Specific HDMI interface  
amount in accordance with work order.)  
W
Y
AV machine  
AV Video Signal Connection  
Through composite cable, connect AV equipment  
VIDEO output termination to this machine VIDEO  
input, and AV equipment AUDIO output termination  
to this machine AUDIO input, respectively.  
R
W
AV Output Connection  
If you need watch image of DV and connect your  
TV game machine, you can connect audio or video  
output end of DV and game machine to the monitor.  
R
B
YPbPr/YCbCr Input Connection  
If the signal source is DVD, Digital wired receiver  
or equipments with the YPbPr/YCbCr output,  
recommends you to connect YPbPr or YCbCr  
CVBS, DVD Player or other  
machine with YPbPr/YCbCr.  
output with the TV YPbPr/YCbCr input. In order to obtains the better picture  
quality, at the same time, please connect its audio output with TV audio input  
as shown in the following chart. If you choose the YPbPr/YCbCr signal, please  
set signal source selection under YPbPr pattern.  
G
7
 
Position of Control Keys  
3
4
5
6
7
1 2  
1) Remote Receiving Sensor.  
2) Power Indicator.  
3) SOURCE: Press this key to enter the menu of signal source and choose signal source.  
4) CH+/CH-: Press these two keys to select the channel, and adjust the options you need under  
OSD operation.  
5) VOL+/VOL-: Press these two keys to add or reduce volume, and adjust the analog value under  
OSD operation.  
6) MENU: Press this key to enter main menu.  
7) Power switch .  
Note: There are some apparent differences between modes, please according to practicality.  
Remote Control  
Remote Control Key Instruction  
Key  
Function  
Invalid  
Mute  
POWER  
MUTE  
Turn on or standby  
Power  
Eliminate sound  
Numerical key  
F1  
Program list  
SMART S  
SMART P  
Number input button  
Freeze picture  
Look through program list  
Numerical key  
Intelligent sound mode selection  
Intelligent image mode selection  
Up or Down cursor button: function select;  
Left or right cursor button: analog add or reduce  
Sound volume add or reduce button  
Press this button to display menu  
Press this button to display signal source selection menu  
Select channel Number  
Program list  
Cursor key  
Smart sound  
Smart image  
OK  
VOL+/VOL-  
MENU  
SOURCE  
CH+/CH-  
INFO  
Time  
Return  
16:9  
Cursor Key  
Menu  
System information display switch  
Timer setting button, press this key can set time of turning down.  
Press this button to return to last watching channel  
Switch aspect ratio  
Color temperature mode selection button  
Color system mode selection button  
Channel  
Source  
Volume  
INFO  
16:9  
AUDIO  
ROTATE  
FWD.  
Info  
Time  
Invalid  
Color  
Zoom  
Color  
P/N  
Return  
COLOR  
PAUSE  
NEXT  
P
N
NICAM(optionl)  
Color system  
PLAY  
STOP  
REV.  
AUDIO(optional) Select audio mode  
OK  
Confirm operation  
PREV.  
PLAY (  
PAUSE (  
STOP (  
ROTATE (  
PREV. (  
NEXT (  
)
)
)
)
For USB operation  
)
)
REV. (  
FWD. (  
)
)
8
 
Remote Control  
Telecontrol battery installation method  
Take off the cover of battery box, fix two AAA batteries with 1.5 volt, and conform with the polarity of  
remote control battery box.  
Note: Appearance of the remote control may be different from this picture, please according to  
practicality.  
Precautions for use of remote control  
1. When using remote control you should point it to the remote-control inductive window. The goods  
between remote control and inductive window may hinder normal operation.  
2. Do not cause the remote control to receive fierce vibration. In addition, do not set or place the  
remote control under direct sunlight, for the thermal energy will cause the distortion of remote  
control.  
3. When remote-control inductive window of main machine is under direct sunlight or intense  
illumination, the remote control may malfunction, by now, please change the angle of illumination  
or this machine, or approach the inductive window to operate the remote control.  
4. When the battery voltage is insufficiency it influences the remote control distance, you should  
replace with new battery; when not to use the remote control for long or the battery is exhausted,  
please take out the battery, in order to avoid bringing the battery leakage to corrode the remote  
control and thus cause it out of commission.  
5. Do not use different batteries. The mix use of new and old batteries is not allowed, you should  
use battery pair.  
6. Do not throw battery into fire, charge or disassembly, especially do not charge, assemble and  
disassemble, heat or burn to the used battery. Please observe the related environmental  
protection stipulation on wasted battery.  
Basic Operation Instruction  
Power On  
Plug power cord into the electrical socket and press '' '' key on the control panel, then press '' ''  
key on the remote control to turn on the TV.  
Standby  
Press ''Power''key on the remote control. TV will be in standby.  
Special Attention:  
1.TV set will automatically turn to standby if there is no signal input for 5 minutes when TV turns on.  
2.TV set will automatically turn to standby when the preset time of turning off reaches.  
Input Source  
Signal Source Selection  
Press ''SOURCE'' key either on the remote control or on the control panel, then  
TV  
AV  
menu of signal source will be displayed on the screen. Then press ''Up/Down''  
key on remote control or "CH+/CH-" key on the control panel to choose the  
signal source. Press ''OK'' key on the remote control or ''MENU" key on the  
control panel and TV will switch the current signal source to the signal source  
YPbPr  
PC  
HDMI1  
HDMI2  
USB  
you choose.  
9
 
Basic Operation Instruction  
Menu Operation Instruction  
Press ''MENU'' key on the remote control or on the control  
panel. The TV will display the main menu.  
1. Press ''Left/Right'' key on the remote control or ''VOL+/  
VOL-''key on the control panel to select the adjustment  
sort menu, which includes 4 sorts: PICTURE, SOUND,  
OSD, TV.  
2. Press ''Down''key on the remote control or ''CH-'' on the  
control panel to enter the adjustment sort menu.  
3. Press ''Up/Down'' key on the remote control or ''CH+/CH-''  
on the control panel to select what is needed to adjust in  
sort menu.  
Picture Mode  
Contrast  
Brightness  
Saturation  
Hue  
Sharpness  
Aspect Ratio  
Color Temp.  
Noise Reduction  
Soft  
48  
48  
50  
50  
55  
Full  
Standard  
Off  
Adjust  
Select  
Menu:Exit  
4. Press ''Left/Right'' key on the remote control or ''VOL+/VOL-''on the control panel to adjust the  
value or setting.  
5. Press ''Menu'' key to exit the main menu when the TV displays the Main Menu; Press ''Menu''  
key to return to previous menu when the TV displays the submenu; Press ''SOURCE'' key to  
display the signal source menu or exit signal source menu.  
6. During the operation, the selections which can not be adjusted at current mode will be hidden  
automatically and the color of the selections will be changed into gray.  
7. Menu Operation Instruction in this manual is explained according to TV mode. The operations in  
other modes are similar to the one in TV mode. Users can take it as reference.  
PICTURE  
Select  
to enter the PICTURE submenu. Press "Up/Down" key on the remote control or "CH+/CH-"  
key on the control panel to choose what you need. Press the "Left/Right" key on the remote control  
or the "VOL+/VOL-" key on the control panel to adjust analog value or state (see below table).  
Special Attention  
1. The Hue function is available only for NTSC system.  
2. The value adjusted by user, such as Contrast, Brightness, Hue, Saturation, and Sharpness will  
be saved automatically by the machine as User mode.  
Remote Control Shortcut Keys  
SMART P: Press SMART P key on the remote control. You can switch the function among the  
"Standard", "Soft", "User", "Bright" four modes .  
16:9: Press 16:9 key on the remote control, you can switch the mode among the "Full, "4:3",  
"Subtitle","Film" four modes.  
Option  
Picture Mode  
Contrast  
Function  
Select picture mode  
Adjust the contrast of whole  
picture  
Adjust brightness and blackness  
of whole picture  
Adjust the saturation of whole  
picture  
Adjust the hue of whole picture  
Description  
"Standard", "Soft", "User," "Bright" four modes.  
Increasing analog value increases Contrast;  
Decreasing analog value decreases Contrast(0-100).  
Increasing analog value increases brightness;  
Decreasing analog value decreases brightness(0-100).  
Increasing analog value increases color;  
Brightness  
Saturation  
Hue  
Decreasing analog value decreases color (0-100).  
Increasing analog value increases green;  
Decreasing analog value increases purple(0-100).  
Increasing analog value increases definition;  
Decreasing analog value decreases definition (0-100).  
Sharpness  
Adjust the sharpness of whole  
picture  
10  
 
Basic Operation Instruction  
Option  
Aspect Ratio  
Color Temp  
Description  
"Full, "4:3", "Subtitle","Film" four modes  
There are three Color Temperature modes, "Standard",  
"Warm", "Cool ".  
Function  
Select picture scale  
Select color temperature mode  
of the picture  
Noise Reduction  
Select model of 3D NR  
"Middle", "High", "Off", "Low".  
SOUND  
Select  
to enter the SOUND submenu. Press "Up/Down" key on the remote controlor the key  
"CH+/CH-" on the control panel to choose what you need.  
Press the "Left/Right" key on the remote control or the  
"VOL+/VOL-" key on the control panel to adjust analog  
value or state (see below table).  
Sound Mode  
Treble  
Bass  
Balance  
Auto Volume  
Standard  
Off  
50  
50  
0
Special Attention  
1. Normally, 0 value of adjustment is recommended;  
2. The treble or bass analog value which is adjusted by  
the users will be saved as the User mode by the  
machine  
Remote Control Shortcut Keys  
Adjust  
Select  
Menu:Exit  
SMART S: Press SMART S key on the remote control.  
You can switch the function among the "Standard", "Music", "Movie", "User" four modes.  
MUTE: Open or close sound.  
VOL+/VOL-: Add or reduce volume.  
Option  
Sound Mode  
Treble  
Function  
Adjust audio effect mode  
Adjust treble value  
Description  
"Standard", "Music", Movie", "User" four modes.  
Increasing analog value increases treble;  
Decreasing analog value decreases treble (0-100).  
Increasing analog value increases bass;  
Bass  
Adjust bass value  
Decreasing analog value decreases bass (0-100).  
Increasing analog value decreasing left volume;  
Decreasing analog value decreases right volume(L50-R50).  
"On/Off", two states.  
Balance  
Auto Volume  
Adjust balance of left or right sound  
Select Auto Volume  
OSD  
Select  
to enter the OSD submenu. Press "Up/Down"  
OSD Language  
OSD Duration  
OSD Transparency  
Blue Screen  
Sleep Time  
English  
60 Second  
key on the remote control or "CH+/CH-"key on the control  
panel to choose what you need. Press the "Left/Right" key  
on the remote control or the"VOL+/VOL-" key on the  
control panel to adjust analog value or state (see below  
table).  
0
On  
Off  
Recall  
Adjust  
Select  
Menu:Exit  
Option  
OSD Language  
OSD Duration  
Function  
Description  
Select language for OSD display There are many languages to select  
Adjust duration of OSD menu  
Increasing analog value, extend duration time of OSD menu;  
(15, 30, 45, 60). Unit: second  
OSD Transparency Adjust halftone of OSD menu  
Increasing analog value increases halftone;  
Decreasing analog value decreases halftone(0-100).  
"On/Off", two states.  
"Off, 15M, 30M, 45M, 60M,90M, 120M, 240M", unit: minute.  
Reset all values to setting of factory.  
Blue Screen  
Sleep Time  
Recall  
Open or close blue screen  
Set sleep time of the machine  
Resume to setting of factory  
11  
 
Basic Operation Instruction  
TV  
Select  
to enter the TV submenu. Press "Up/Down" key on the remote control or "CH+/CH-" key  
on the control panel to choose what you need. Press the  
"Left/Right" key on the remote control or the "VOL+/VOL-"  
key on the control panel to adjust analog value or state  
(see below table).  
Color System  
Sound System  
Skip  
Auto Search  
Manual Search  
Fine Tune  
PAL  
DK  
On  
Option  
Function  
Description  
Color System Select color system "PAL, NTSC, AUTO" three modes.  
Sound System Select sound system "I, DK, M, BG" four modes.  
45.30 MHz  
Skip  
Auto Search  
Select skip or not  
Select auto search  
"Off/On" two states.  
Please refer to "Auto Search"  
Channel Edit  
Manual Search Select manul search Please refer to "Manual Search"  
Fine Tune  
Select fine tune  
Please refer to "Fine Tune"  
Adjust  
Select  
Menu:Exit  
Channel Edit  
Select channel edit Please refer to "Channel Edit"  
Auto Search  
Select  
to enter the submenu of TV. Then press ''Up/Down'' key on  
Auto Search  
Progtranme  
the remote control or ''CH+/CH-'' on the control panel to select ''Auto  
Search''. The machine perform search after pressing ''Right '' key on  
the remote control or ''VOL+'' on the control panel. (In the process of  
searching the channel automatically, press the key of ''MENU'' on the  
remote control ,a dialogue of "Do you want to exit searching?" display  
on the screen. Press "Left" cursor key to confirm and exit. Press "Right"  
cursor key to cancel operation and continue auto search). All of the  
TV programs will be saved automatically.  
Found  
:
0
0
%... 50.25 MHz  
VHF-L  
Menu:Exit  
Manual Search  
CH: 1  
Search  
Manual Search  
Frequency 45.25 MHz  
Select  
to enter the submenu of TV. Then press ''Up/Down'' key on  
the remote control or ''CH+/CH-''on the control panel to select ''Manual  
Menu:Exit  
Search''. Then press the key of ''Right'' on the remote control to enter submenu of Manual Search.  
Press ''Left/Right'' key on the remote control to select channel No.. Press ''Up/Down'' key on the  
remote control to select ''SEARCH'', press ''Left/Right'' key on the remote control again, the machine  
begin searching toward low frequency or high frequency. (In the process of searching the channel  
automatically, press the key of ''MENU'' on the remote control to  
Channel Edit  
stop searching).  
1 CH  
2 CH  
3 CH  
4 CH  
5 CH  
6 CH  
7 CH  
8 CH  
9 CH  
Fine Tune  
Select  
to enter the submenu of TV. Then press ''Up/Down'' key  
on the remote control or ''CH+/CH-'' on the control panel to select  
''Fine Tune''. Press ''Left/Right'' key on the remote control to  
adjust from low frequency or high frequency.  
Channel Edit  
Select  
to enter the submenu of TV. Then press ''Up/Down'' key  
on the remote control or ''CH+/CH-'' on the control panel to select  
''Channel Edit''. Press ''Right'' key on the remote control to enter  
submenu of ''Channel Edit''  
1:Delete  
OK:Enter  
2:Move  
3:Skip  
Menu:Exit  
12  
 
Basic Operation Instruction  
Delete: Press ''Up/Down'' key on the remote control to select channel which you wish delete. Press  
"1" key on the remote control, press "MENU" key to return .  
Move: After select channel, press "2" key on the remote control, then press ''Up/Down'' key on the  
remote control to select position where you wish place, then press "MENU" key on the remote  
control to return.  
Skip: Press ''Up/Down'' key on the remote control to select channel, press ''3'' key on the remote  
control to open or close "Skip".  
Select Channels with "CH+/CH-" Key  
Press ''Channel'' key on the remote control or CH+/ CH-" key on the control panel to select the  
channels.  
Select channels with the Return key you can go to the last channel when pressing the Return key.  
For example, if the last channel is 10 and the current channel is 20, you will go to channel 10 when  
pressing the Return key. You can switch the two favourite channels as you like.  
Select Channels with Numeric Keys  
1. Operations to select channels with 1 digit (0-9):  
Press the number keys (0-9)on the remote control to select TV channel directly.  
2. Operations to select channels with 2 digits (10-99):  
HOTEL MODE  
ON  
Press the number keys with 2 digits (10-99) on the remote control  
to select TV channels.  
3. Operations to select channels with 3 digits (100-199):  
Press the number keys with 3 digits (100-199) on the remote  
control to select TV channels.  
CH LOCK  
OFF  
MAX VOL  
100  
AUTO SET  
ON  
PICTURE MODE  
POWER VOL  
POWER SOURCE  
CH NUMBER  
KEY LOCK  
STANDARD  
30  
TV  
1
Hotel Function(optional)  
Press "MENU" key on the remote control to display the main TV  
menu, and then press "4578" on the remote control to display the  
hotel function menu. Press "Up/Down" key to enter into the menu  
and select the item which you need to adjust, and then press "Left/  
Right" key to adjust the value or state.  
OFF  
1
LOCK CH NUM  
LOCK  
OFF  
CLONE  
Note: With the mode of AV, YPbPr, PC, HDMI, all functions and adjustments are similar with  
TV. User can check it at convenience. HDMI connector can realize DVI connector function  
with external HDMI/DVI commutator.  
USB Signal Source Operation  
Please insert USB memory card into USB interface of TV, press "source" key on the remote control  
or control panel to select USB signal source, press "OK" key to enter.  
Note:  
USB function support file format with video file/sound file/graphic file/text file. For some  
13  
 
Basic Operation Instruction  
nonstandard USB storage devices, may appear condition of unable recognize, please replace the  
standard USB storage device.  
Streaming media system to play a file for each format has certain limitations, if more than the  
system limit, then play will be wrong  
Do not pull up USB storage devices when system playing, this may result in system or equipment  
problems  
The system supports USB1.1 and USB2.0 connector, the standard transport protocol such as U  
disk and removable hard disk storage devices.  
USB 2.0  
Press "Left/Right" key on the remote control to  
select the document sort menu, which includes 4  
sort: PHOTO, MUSIC, MOVIE, TEXT.  
Remote Control Shortcut Keys  
The last two row keys on the remote control are  
used for USB operation.  
PHOTO  
MUSIC  
MOVIE  
TEXT  
PHOTO  
Select  
to enter the PHOTO submenu. Select  
C:\PICTURE  
1 / 11  
your mobile U disk or hard disk, and press "OK"  
key on the remote control to read your photo  
documents.  
Return  
Up Folder  
13.jpg  
10.jpg  
11.jpg  
Select to return previous menu. Press cursor  
key on the remote control to select photo and  
press "OK" key (After the photo was selected,  
the file lower right corner shows a red hook. you  
can choose photos to join playlist.). Press "PLAY"  
12.jpg  
16.jpg  
14.jpg  
18.jpg  
15.jpg  
19.jpg  
17.jpg  
key on the remote control to play. when you choose nothing, the machine will join all the photos in  
the file in playlist automatically.  
Basic Function  
When photos are playing, press "INFO" key on the remote control, a toolbar will display under the  
screen(Press "Down" key on the remote control to hide toolbar).  
Play/Pause: Press "Left/Right" key on the remote control to select this function, press  
"OK" key to play or pause .  
Prev.: Press "Left/Right" key on the remote control to select this function, press "OK"  
key to read previous photo.  
Next: Press "Left/Right" key on the remote control to select this function, press "OK"  
key to read next photo.  
Stop: Press "Left/Right" key on the remote control to select this function, press "OK"  
key to stop playing and return to previous menu.  
Repeat: Press "Left/Right" key on the remote control to select this function, press "OK"  
key to select repeat One or repeat all or not repeat.  
14  
 
Basic Operation Instruction  
Music: Press "Left/Right" key on the remote control to select this function, press"OK"  
key to play background music.(Musics and photos need to place in the identical folder,  
or you may select some music in music file first.)  
Playlist: Press "Left/Right" key on the remote control to select this function, press "OK"  
key to show playlist.  
Info. : Press "Left/Right" key on the remote control to select this function, press "OK"  
key to show the information of photo. Including resolution, size and so on.  
Clockwise: Press "Left/Right" key on the remote control to select this function, press  
"OK" key to clockwise rotation photo.  
Counter-clockwise: Press "Left/Right" key on the remote control to select this function,  
press "OK" key to counter-clockwise rotation photo.  
MUSIC  
The operations are similar to the "PHOTO".Please refer to "PHOTO" options.  
Basic Function:  
FB: Press "Left/Right" key on the remote control to select this function, press "OK" key  
to fast back. Press "PLAY"key to play normally.  
FF: Press "Left/Right" key on the remote control to select this function, press "OK" key  
to fast forward. Press "PLAY"key to play normally.  
Select time: Press "Left/Right" key on the remote control to select this function, press  
"OK" key to select the time to play .  
Other functions are similar to the "PHOTO", Please refer to "PHOTO" options.  
MOVIE  
The operations are similar to the "PHOTO".Please refer to "PHOTO" options.  
Basic Function:  
Set A: Press "Left/Right" key on the remote control to select this function, press "OK"  
key to set A and B, the film will circulating play in the time of A to B.  
SF: Press "Left/Right" key on the remote control to select this function, press "OK" key  
to slow down play speed. Press "PLAY"key to play normally.  
Step: Press "Left/Right" key on the remote control to select this function, press "OK" key  
to play one step by step. Press "PLAY"key to play normally.  
Zoom in: Press "Left/Right" key on the remote control to select this function, press "OK"  
key to enlarge picture. (if the document is larger than 1920×1080, this function is  
unsupported.)  
Zoom out: Press "Left/Right" key on the remote control to select this function, press  
"OK" key to reduce picture.(This function does not support more than 1920×1080  
HDvideo.)  
Proportion: Press "Left/Right" key on the remote control to select this function, press  
"OK" key to select proportion among Auto/4:3/Full.(This function does not support  
more than 1920×1080 HDvideo.)  
TEXT  
The most operations and functions are the similar to "PHOTO". Please refer to "PHOTO" options.  
15  
 
Simple Troubleshooting  
Symptom  
Factor  
Solution  
1.Antenna cable connector is loose,  
1.Check the antenna cable connector plug whether or  
not loose, cable whether or not perfect.  
cable is damaged.  
2.Channel setting is incorrect.  
3.Antenna cable type is not matching.  
4.Direction or position of antenna  
cable is incorrect.  
2.Refer to channel setting method, resetting again.  
3.Check antenna cable type(VHF/UHF)  
Snowflake speckle and  
sound noise.  
4.Adjust direction or position of antenna cable .  
5.Attempt to use signal amplifier.  
5.Signal is weak.  
TV image is better, but has  
noise.  
TV system setting is incorrect.  
Enter to "TV" menu, reset sound system again .  
1.Check power cord whether or not connect well.  
2.Check if " " on the panel is on.  
Power plug is loose, power  
cord don't connect well.  
No image. No sound.  
Signal is exposed to disturb,  
such as car, neon light, electric  
blower etc.  
Don't use electric blower around machine, adjust  
antenna cable direction to reduce disturb.  
TV image have stripe.  
1.TV signal is reflected by valley  
1.Use high directional antenna cable. Use Fine  
Tune of "TV".  
2.Adjust toward direction of antenna cable.  
or building.  
TV image have shadow.  
No color.  
2.Toward direction of antenna  
cable is incorrect.  
1.Color saturation is too low.  
2.Color system is incorrect .  
1.Enter "PICTURE" to add up color saturation.  
2.Enter "TV" to change color system.  
1.Adjust volume to proper value.  
2.Press "MUTE" button on remote control to  
eliminate mute.  
1.Volume setting is too low.  
2.Sound is muted.  
3.Sound system is incorrect.  
TV no sound.  
3.Enter "TV" to change sound system.  
Computer no display,and  
prompt no signal input,red  
indicator LED twinkling.  
Check signal cable whether or not loose, fall off,  
reconnect well again.  
Signal cable is loose or fall off.  
1.Receive window of remote  
continue was covered by  
objects.  
2.The battery energy of remote  
control is to low.  
1.Remove objects, avoiding cover the receive  
window of remote control.  
2.Change battery.  
Remote control distance is  
short, lose control.  
1.Adjustment is incorrect.  
2.Display mode is incorrect.  
1.Use auto-adjustment function.  
2.Use commend mode.  
Computer display faintly.  
1.Use auto-adjustment function.  
2.Enter "GEOMETRY" to adjust horizontal or  
vertical position.  
Computer display image  
excursion, not full screen,  
over screen.  
1.Adjustment is incorrect.  
2.Display mode is incorrect.  
3.Use recommended mode.  
Noise Signals at turning off. Electrical release at turning off.  
Exterior influence, for example  
It is normal.  
Press " " button to turn off electrical source,  
then press " " button to turn on the TV again  
after 1-2 minutes.  
lightning, static electricity and so  
Can not operate this  
on, which are possibly to disturb  
machine.  
the normal operation of this  
machine.  
CAUTION: Don't let your machine display the same picture for a long time, please set up a screen protection  
procedure. If a high contrast picture remains for along time, this picture will bring a 'leave shadow' in screen.  
Usually the 'leave shadow' will disappear gradually when you turn off the machine power. However, this  
trouble can't be repaired, Which isn't in range of warranty.  
16  
 
 

GPX TV DVD Combo 1630 0629 10 User Manual
Haier Dishwasher DW12 PFE2 E User Manual
Hand Held Products Battery Charger Dolphin 7200 User Manual
Healthrider Home Gym HREX13950 User Manual
Heath Zenith Door 598 1109 05 User Manual
Honeywell Automobile Parts VU443A User Manual
Honeywell Switch 272630D User Manual
Hotpoint Cooktop EC6005 User Manual
Hotpoint Microwave Oven EDC51 User Manual
Husqvarna Trimmer 324LD User Manual