Havis Shields Automobile Accessories C TSM CV D User Manual

INSTALL INSTRUCTIONS

C-TSM-CV-D and C-TSM-CV-P

1996-2008 CROWN VICTORIA

DRIVER and PASSENGER - TRUNK SIDE MOUNTS

TOOLS REQUIRED:

• Drill with 1/8” and 3/16” drill bits

• Open End Wrench - 3/8”

• Phillips Screwdriver

HARDWARE:

QTY:

DESCRIPTION:

PART #:

10/32 X 1/2” Machine Screw

10/32 Keps Nut

GSM33118

GSM30028

GSM33195

#10 x 3/4” Sheet Metal Screw

LINE DRAWING:

Passenger Side shown

# C-TSM-CV-P

Always!

• Read all instructions before installing any Havis-Shields Equipment Corp products.

• Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!

• Use hardware provided with install kit

• For product support: visit the Install Instructions Section of our website at

http://havis.com/Installation/Installation.html, email technicalsupport@havis.com or call 1-800-524-9900.

C-TSM-CV-P_INST_4-08